back to tape-measure beams

4 reflector:


Like the director, the reflector could also be carved or shimmed with double-sided foam tape.

I use black electrical tape to attach the reflector, to save on weight and cost. And I give the coax feed a
few wraps of tape as well, to prevent a tug on the coax from ripping off the feed.

Also note the use of a bit of velcro on the mast. I coil up the coax and fasten it here for storage and
transport.

reflector (carved) 1	reflector (carved) 2	reflector (shimmed)

highest resolution images
last updated 05/10/2025 at 21:42:56 by make_www_index.command version 2025.05.08.A