back to totes

pp jumpers CCA:




Powerpole jumpers are cut in a wide variety of lengths, and most of them are using #10 CCA. This isn't
ideal for high current or long runs, but it isn't intended to be used for either, so I just went with the less
expensive and lighter CCA for the jumpers. I do have a few runs of OFC (pure copper) but that gets expensive,
especially for long runs. Ideally, the long runs (to the satelite stations) will stay fairly low current as
they're just keeping batteries charged. The transmission line from the solar panels will be high voltage, and
current should stay low except when the load gets very high, which shouldn't happen very often, maybe in the
morning after the batteries have been discharging all night.



jumpers cca:


powerpole CCA jumpers:



highest resolution images
last updated 02/13/2025 at 21:12:32 by make_www_index.command version 2025.01.29.A