home controller harness rev3
home controller harness rev3:
A new harness for a new controller. This one does NOT have integrated load-switching capability. It uses
a signal wire to operate a user-provided remote contactor, so the harness only accommodates the panel input
and battery output. Given the higher current, I supplied a pair of battery harness attachments, for the
capability of hooking up several batteries, or one battery harness and one load harness.
1 gathering parts
2 stripped and prepped for splicing
3 splice joined
4 splice soldered
5 splice cooled and cleaned up
6 heat shrinked
7 installed
highest resolution images
last updated 02/15/2025 at 00:24:52 by make_www_index.command version 2025.02.14.A
