back to powerpole projects

SB50 to battery clamps project:


Something I've been meaning to make - a jumper to directly connect one of my large batteries to the posts of
another unwired battery. (or the opposite - to get a high current connection on a guest battery) This jumper
uses some nice flexible 6ga welding cable and some sturdy yet small (and well-insulated) clamps.

I got the clamps when buying some cheap schottky boxes to make battery isolation pigtails with, and the clamps
are both compact and surprisingly good quality. They're easy to replace the wire on, even this #6.



jumper cables with isolator ($9 at eBay)


6ga SB50 to battery clamp jumper:



highest resolution images
last updated 02/18/2025 at 13:21:21 by make_www_index.command version 2025.02.14.A