back to PowerPole distribution blocks

revision 2 revision 2:


"Plan B" worked much better. It took a bit of experimentation to get the lengths of wire right, since short
bits of solid number 10 wire don't bend easily, but I got some good results. The key is to solder most of the
wires together while they're IN the housing. (see instructions below)

instructions mark 2.txt


  1 repare common and far end 1  
   1 repare common and far end 2  
   1 repare common and far end 3  
   1 repare common and far end 4  
   1 repare common and far end 5  
   10 inspect solder 1  
  1 repare common and far end 1     1 repare common and far end 2     1 repare common and far end 3     1 repare common and far end 4     1 repare common and far end 5     10 inspect solder 1  
  10 inspect solder 2  
   11 add hole for LED indicator 1  
   11 add hole for LED indicator 2  
   12 install and solder indicator 1  
   12 install and solder indicator 2  
   12 install and solder indicator 3  
  10 inspect solder 2     11 add hole for LED indicator 1     11 add hole for LED indicator 2     12 install and solder indicator 1     12 install and solder indicator 2     12 install and solder indicator 3  
  12 install and solder indicator 4  
   2 make another port 1  
   2 make another port 2  
   2 make another port 3  
   3 make 3 more ports 1  
   3 make 3 more ports 2  
  12 install and solder indicator 4     2 make another port 1     2 make another port 2     2 make another port 3     3 make 3 more ports 1     3 make 3 more ports 2  
  4 install and fit more ports 1  
   4 install and fit more ports 2  
   5 solder ports while installed 1  
   5 solder ports while installed 2  
   6 remove  
   7 flip  
  4 install and fit more ports 1     4 install and fit more ports 2     5 solder ports while installed 1     5 solder ports while installed 2     6 remove     7 flip  
  8 install into other side  
   9 solder other side 1  
   9 solder other side 2  
  8 install into other side     9 solder other side 1     9 solder other side 2  


highest resolution images
last updated 02/10/2025 at 20:03:17 by make_www_index.command version 2025.01.29.A