back to PowerPole distribution blocks

revision 1:


This was my first attempt at wiring up one of his distribution blocks. I used 16ga stranded wire which turned
out to be a mistake. Managing so many connections with short runs of stranded wire is like herding cats, and
it was very difficult to get the block closed. There was also a pileup of wire at the feed end, which almost
prevented me from getting it closed due to lack of space.



instructions mark 1.txt

1 harness 1	1 harness 2	2 installed

highest resolution images
last updated 05/20/2025 at 19:19:36 by make_www_index.command version 2025.05.20.B