back to 100v 20a dual meter project

4 wiring and test:


Finally, reinstalled the boards into the meter bezels, and wired everything together. (there's very little to
wire up, leaving lots of open space in the enclosure)

Gave it a quick smoke-test, and then plugged in the electronic load and maxed out my bench supply to test it.

1 meter boards installed	2 wiring complete	3 smoke test	4 current test

highest resolution images
last updated 02/15/2025 at 18:17:48 by make_www_index.command version 2025.02.14.A