3 installing bezels and housings
3 installing bezels and housings:
Next I warmed up the hot glue gun and glued in the meter faceplates and PP30 powerpoles.
Not much to say here - just make sure the reset button holes are where you want them, and make sure to get the
powerpole connectors in straight and at whatever left/right orientation you prefer.
1 meter faceplates hot glued
2 gluing PP30 jacks1
3 gluing PP30 jacks2
4 PP30 jack cooling1
5 PP30 jack cooling
6 inside before wiring
highest resolution images
last updated 02/15/2025 at 18:17:48 by make_www_index.command version 2025.02.14.A
