that's exactly what I needed, thank you!

page 5 shows me how to fab a remote, and the resistor I need to replace should be on page 4.  (I don't see it offhand, I will have to look at the board and track it down)

- Nathan


On Jun 13, 2013, at 9:41 AM, Ken Schwantje wrote:

Well it appears that we did not discard the old schematic but it is only a
scanned version.

I hope it provides you with enough information.

Best regards

Ken



-----Original Message-----
Sent: June-13-13 7:22 AM
To: Ken Schwantje
Subject: Re: PSE-12150A


SN is 9604522

model is PSE-12150A

it uses what looks like a RG-45 on the bottom for the remote.  It has only
the middle four conductors tied to anything from what I can tell.  Looks
like +12 hot, +12 on, ground, and probably a data line.

Bought from Heartland America catalog a LONG time ago.  (12-15 yrs?)

I'd be VERY surprised if it's a "current" model.  Hopefully you didn't'
change the remote design, and hopefully you didn't throw away your
schematics of your previous models.

Thanks for checking.


- Nathan