back to powerpole jumpers

short low current jumpers:


Just making up some short, low current jumpers. I'm using a different color of heat shrink to finish the ends
to make them easier to recognize. These use 16 gauge pure copper twin-lead, normally used for speaker wire.
The particular reel of wire I'm using is a little different than the linked wire, as it has one of the leads
marked with a thick red stripe instead of a subtle banded texture.



100ft 16ga OFC stranded twin lead ($16 at Amazon)


teal 3/4-inch glue-shrink ($10 for 4FT)


four 18-inch jumpers:


teal 3/4-inch glue shrink:



highest resolution images
last updated 05/20/2025 at 19:18:31 by make_www_index.command version 2025.05.20.B