back to gin pole and stand

tower stand and gin pole:


Tower Step:

A: qty 2 of 1.5" x 10" x 1/4" bar
B: qty 2 of 2" x 3" x 1/4" bar (will be bent)
C: qty 2 of 13" x 1/3" dia bar
D: qty 1 of 14" x 14" tread plate (with cuts and bends)


Gin Pole Clamp:

A: qty 2 of 9.5" x 3.5" x 1/8" plate
B: qty 1 of 9.5" x 2 1/16" ID thinwall pipe
C: qty 6 of 3" x 1/4" dia bar
D: qty 5 of 1.25" x 3/8" ID pipe (one of which is cut at 1/4")
E: qty 3 of 3.5" x 3/8" coarse threaded bar
F: qty 3 of 1.75" x 3/8" coarse thread long nut
G: qty 2 of 9.5" x 1.25" angle iron
H: qty 3 of 2" long 1" wing hinge
I/J: qty 3 of 1.25" x 1.25" x 3/8" bar (two notched and beveled ,one drilled and beveled)
K: qty 2 x 3/8" ID washer




last updated 11/07/2023 at 13:49:55