back to 2 cable guide bent

2 control cable bruised:


After leaving the tie-down at the top cable guide, the coax split off to go up to the antenna, and so had some
room to pull. The rotor control cable on the other hand looped around the back of the cable guide and headed
down the middle of the tower to connect to the rotor. This resulted in the cable getting pulled hard across
the end of the guide tubing, and got a pretty big dent put in the outer jacket. It didn't penetrate the jacket
though so the wires are probably okay. The PVC jacket on this control cable is surprisingly durable.

control cable bruised 1	control cable bruised 2	control cable bruised 3	control cable bruised 4

highest resolution images
last updated 12/08/2023 at 18:37:07 by make_www_index.command version 2023.12.07.D