back to Antenna Parties

2022.09.26 W0NCW replace rotor cable:




This was my second trip out to this tower. It's a three section powered raise tower, with a tilt-over option
(that the new neighbor has defeated by installing a shed where the beam will tilt over to)

The first visit was to take down a dead rotor, but that changed when I discovered squirrel-chewed controller
cable. He bought some new cable, and I returned after having gotten the rotor connector moved. Then it was
just a quick cable swap and soldering on the controller end. (after feeding it through the wall)

2022.09.26 09.13.48 tower	2022.09.26 12.14.31 tower	2022.09.26 12.14.43 top	2022.09.26 12.14.51 rotor	2022.09.26 12.14.52 rotor	2022.09.26 12.14.57 feed
2022.09.26 12.15.00 feed	2022.09.26 12.15.20 powered raise	2022.09.26 12.15.26 powered raise	2022.09.26 12.15.35 powered raise	2022.09.26 12.15.46 looking up	2022.09.26 12.15.55 looking up closer
2022.09.26 12.20.00 entrance	2022.09.26 12.20.15 entrance	2022.09.26 12.20.26 entrance	2022.09.27 14.17.27 rotor cable sealed	2022.09.27 14.17.28 rotor cable sealed

highest resolution images
last updated 12/08/2023 at 18:36:27 by make_www_index.command version 2023.12.07.D