back to dummy load

250w non-inductive resistor:




The idea here is to bolt this to a heat sink and run it to a coaxial connector or switched line to a feed line.
For example, you can add a built-in dummy load to your big ol tuner by adding a big toggle switch outside and
bolt one of these to the inside of the case, and use the case as the heat sink.



250w non-inductive resistor ($8 at Amazon)

51-CSO7ex6L._SL1035_	51rh3II9PCL._SL1189_	61rj4hGD1RL._SL1205_

highest resolution images
last updated 07/19/2026 at 23:07:29 by make_www_index.command version 2026.07.10.A