Index of /N0ZYC/radio/foxhunting/hunting/attenuators/N0ZYC Hybrid Attenuator/2 second build/max

• Parent Directory
• 01 preparing the enclosure.JPG
• 02 rotary switch marked.JPG
• 03 bypass and part of 20+40 resistors in.JPG
• 04 20 and 40 attenuators done.JPG
• 05 some micro coax (1.13mm) prepped.JPG
• 06 offset attenuator board soldered.JPG
• 07 ready for fit-test and hot glue.JPG
• 08 attaching the control knob.JPG
• 09 attaching the control knob.JPG
• 10 resistor network on attenuator.JPG
• 11 adding coax.JPG