back to datasheets and parts

NTC-10K thermister:




This should be a plug-in thermistor for the YR-1001 fan controller. The board is marked with this part number,
including "10k", which should be the correct resistance value.

There were other slightly cheaper options available, but they had no sleeves, wire with no strain relief, no
end connector, etc. so I went with these. They're also available in a waterproof design with the thermistor
in a sealed metal cylinder and on a long cable.



NTC-10K (5pcs for $8 at Amazon)

closeup	dimensions	five count

highest resolution images
last updated 06/10/2025 at 14:50:53 by make_www_index.command version 2025.05.20.B